Untitled Document
  • 6th April 2013 – Spare wheel well – final fit

    Once the rear wiring harness was sorted out we moved onto fitting the spare wheel well. This is a hexagonal fibreglass section that came as part of the body from Gerry. It is best to fit this while the fuel tank is out as the tank slightly overlaps the rear edge. Its relatively easy to fit. We used dum dum putty to make a seal around the edge and bolted it down with 24  flat head bolts (4 on each side), which we counter suck  in place.

    1 responses to “6th April 2013 – Spare wheel well – final fit”

     Leave a reply