Untitled Document
  • 26th October 2013 – Rear bulk head panel

    rearBulkHeadPanel3

    The next job was to make the cover panel the SVA Seatbelt frame. We decided to use thin plywood sheet for the actual cover panel which we eventually plan to cover in carpet. This is important and needs to be done for the IVA test as the frame has too many sharp edges and trap points. So we started by making some cardboard templates to cover the frame. Once we had  the template we marked it up on the plywood and cut it out. Additional holes are needed for the frame bolts and seat belt mountings.

    Then just to finish it off we decided to spray it up black. This isn’t necessarily required as we eventually plan to cover this panel in carpet.

     

    rearBulkHeadPanel1rearBulkHeadPanel2