12th January 2013 – Fitting the fuel tank and filler cap
The job of fitting the fuel tank and the fuel filler cap really have to go hand in hand. When we were fitting the rollbar we had provisionally fitted the fuel tank in [...]
12th January 2013 – Preparing the tank for fitting
We were on to fitting the fuel tank next but before we could fit it we had to first prepare the tank. As advised in the manual, firstly we lined the sides of [...]
5th January 2013 – Filler cap more modifications
We had seen that there was no seal between the cap and the fuel filler flanges, so we thought there might be a potential for fuel to leak when cornering and also via [...]
5th January 2013 – Fuel filler modifications
We decided to modify the lower sections of the fuel filler cap assembly. Mark was worried that if the O ring seal between the 2 pieces ever failed, with the roof fitted, there [...]
1st January 2013 – Interior panels filled with expanding foam
We haven't had much of a chance to get on with stuff for the last 2 months due to christmas and other things, we hope to get the build back on track again [...]