We had previously connected up the dash and wiring looms as well as mechanical gauge connections, water temperature, oil pressure, oil temperature. These all run directly from the gauges through the bulkhead onto [...]
Starting 1st time We got a temporary 5 litre tank of petrol from the garage round the corner and put the end of the fuel line in ready. Mark then connected the fuel [...]
We were then onto fitting the distributor. We fitted the rotor arm to be TDC (top dead centre) for number one cylinder. See diagram for the configuration of distributor cables to cylinders. Next [...]
We decided we'd really like to get the Cobra started before we get the body back on. First job was fitting the oil Pressure gauge to the end of the pipe which runs [...]
