28th January 2012 – Fitting the pedal box and throttle pedal
We started today thinking it was about time we fitted the pedal box. As we had already cut the hole in the footwell ages ago, its a job we could now do as [...]
3rd December 2011 – Engine bay – extra metal panels
We decided after a little discussion to make some extra aluminium panels for the well sections connecting the inner wings inside the engine bay to the pedal box and footwells. Originally we had [...]
24th September 2011 – Extra fibre glass on the pedal box
Mark decided to add some extra fibre glass to the floor where I had made the cut out for the pedal box. He cut a piece of fibre glass matt to bridge from [...]
10th September 2011 – Extending the pedal box hole
Due to the modification Mark had made to the pedal box by wielding a new flange around the edge, we had to spent a couple of hours cutting and extending the hole. The [...]
20th August 2011 – Pedal box adapted with new flange
After seeing Andy Gordons FIA Cobra at the Silverstone show, Mark decided he would like to make a modification to the pedal box by welding an extra flange around the edge. By cleverly [...]
22nd July 2011 – Cutting the hole for the pedal box
After cutting the side vetns, next was the pedal box hole. This was a little more fiddly due to its position at the end of the foot well. Again the position for the [...]