We received all the water pipes and T-bolt clamps. A few week before we had used some old off cut pieces of pipe to make templates of the sizes and angles we required. The pipes required to connect between heater box and the heater matrix pipes where a little more complex as they needed a double 45 degree bend, so Mark decided to make a template from copper pipe bent to the correct position. We then went about ordering them in a classic Silicone finish from DerbyPerformanceHose . The classic silicone pipe has a more vintage look to them which is what we are after. When they arrived we simply had to cut them to length before fitting. We are really happy with the way they look.